Products
Ref : 1043423 - 525A2 ALTUS RTS 25/20SJTW 10FT
Altus® RTS 525A2
Tubular motor typically used for exterior applications.
LT50 Altus is a tubular motor with no need for an electrician. Compatibility with the full range of RTS controls and accessories.
Applications | ||
---|---|---|
Awning / Exterior Solar Screens / Interior Window Coverings : Blinds, Shades / Projection screen / Retractable Insect Screens / Rolling shutter | ||
Embedded Technologies | Warranty | |
RTS | 5 years |
Product benefits
Easy Install
- Plug and play motor with no need for costly wiring.
- Interchangeable power cords, or a quick connector with extension options, provide multiple power cord lengths to meet installation demands.
- RTS provides wireless commands to eliminate control wiring.
- Limits easily set using a hand-held remote.
Comfort & Convenience
- Long range remote control doesn't require direct line of sight.
- Smartphone and tablet app available for quick and easy control even while away.
- Use natural voice commands to control RTS motorized solutions with TaHoma.
Energy Savings
- Motorized exterior screens can potentially block up to 90% of solar rays.
- Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
- Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.
Protection
- Motorized retractable awnings and exterior screens not only shield occupants from the sun, but offer a cool, comfortable outdoor living space.
- Motorized rolling shutters provide a rigid protective barrier for any space and protect from storm damage.

What is the carbon footprint?
The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.
Details and specifications
Comfort & Convenience
- Convenient solution for glare reduction and privacy.
- Superior performance, reliability and ease of operation.
- Close and open all window treatments with a single gesture.
- Remotely control RTS products from any mobile device.
- Use natural voice commands to control RTS motorized solutions by adding TaHoma.
Energy Savings
- Utilize timers to schedule daily open and close times to control natural light and lower energy bills.
- Motorized exterior screens can potentially block up to 90% of solar rays.
- Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
- Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.
Protection
- Add a sun sensor to control UV rays and protect furnishings automatically.
- Add a wind sensor to protect end products from damage.
- Motorized rolling shutters provide a rigid protective barrier for any space.
Other documents & links
Product presentation
Installation information
Downloads & videos
- How to Remove a Control Point Controlling Two Somfy Radio Motors Instead of One View
- How to Remove a Control Point From a Somfy Radio Motor View
- How to Add an Additional Radio Control Point to a Somfy Radio Motor View
- How to Add a Multi-Channel Control Point to a Somfy Radio Motor View
- Add/Delete Transmitter (U-01) View
- How to Replace the Individual Control Point (Lost/ Broken) of Your Somfy Radio Roller Shutter Motor View
- Factory Reset AC Motors (R-18) View
- How to Add a Telis 16 RTS to a Somfy RTS motor View
- How to Adjust The End Limits of a Somfy Radio Roller Shutter Motor View
- How to Reset a Somfy Radio Roller Shutter Motor View
- Limit Adjustment in User Mode (R-04) View
- Setting the “My Favorite” position (U-02) View
- Initial Programming & Limit Setting (R-01) View
- How to Set The End Limits of a Somfy Wired Roller Shutter Motor View
Act for Green
Technical information
Approval |
---|
UR |
Standard |
|
---|---|
Protection Index | IP 44 |
Insulation class | Class I |
Dimension |
|
---|---|
Unwrapped length | 24.13 in |
Unwrapped width | 2.48 in |
Unwrapped height | 2.48 in |
Minimum internal diameter | 1.85 in |
External Diameter | 1.77 in |
Diameter | 1.97 in |
Riveting position distance | 23.23 in |
Technology |
|
---|---|
Radio Frequency | RTS 433.42 MHz |
Number of channels | 12 |
Range in open field | 656.2 ft |
Coding | Rolling code 16 million of possibilities |
Electrical |
|
---|---|
Consumption during operation | 180 W |
Consumption in standby mode | 0 W |
Minimum voltage | 108 V |
Maximum voltage | 132 V |
Rated current | 1.6 A |
Power supply | AC - RGE 2 - 120V/60HZ |
Antenna | Integrated |
Mechanical |
|
---|---|
Speed | 20 rpm |
Torque | 25 Nm |
Type of limit switch unit | Electronic |
Capacity of the limit switch unit (turns) | 250 |
Power scale | AC MOTOR MULTI PHASE 37,5W TO 750W |
Repeatabilty | < +/- 3 |
Head type | STAR |
Thermal tripping | 284 °F |
Cable |
|
---|---|
Cable type | SJTW |
Removable cable | Yes |
Cable length | 9.84 ft |
Cable color | WHITE |
Number of wires of the cable | 3 |
Cable plug ends | STRIPPED |
Wire section | 0.0012 in² |
Other |
|
---|---|
Minimum working temperature | -4 °F |
Maximum working temperature | 158 °F |
Minimum storing temperature | -4 °F |
Maximum storing temperature | 176 °F |
Thermical time | 5 min |
Shape | TUBULAR |
Accessories
157 Product(s)
2.0" Aluminum Tube (Minimum Order Length 20')
Réf. 1781148

Idler Bracket 14mm ID
Réf. 9002540

Sonesse® 50 Star Head Motor Bracket 55P
Réf. 9014135

RollEase “Silent Pin" Star Head Motor Bracket (White)
Réf. 9016858

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft.
Réf. 9018190

Sonesse® 50 & LT50 RTS/RS485 Motor Pigtail to Fast Connector SJTW 3C Cable - 1.6 ft.
Réf. 9020803

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 24 ft.
Réf. 9021053

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft. (Black)
Réf. 9028737

2.0" End Cap with 12mm Shaft
Réf. 9132087

LO LT50 Motor Bracket with Stud (25 Nm max.)
Réf. 9206021

4.0" Round LT50 Drive
Réf. 9420304

Universal Motor Bracket with Spring Ring
Réf. 9420631

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800

Nylon Ball Bearing and Holder with 12mm Hole for 9420604
Réf. 9430610

Motor Bracket "U" Shape
Réf. 9510658

Anti-Blocking System (ABS) 500 Series Right Rotation
Réf. 9705414

2.75" (67mm) Round Crown
Réf. 9707031

DS 70 LT50 Crown
Réf. 9707034

DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005

LT50 RH "LO" Plate with Stud (Silver)
Réf. 9910017

2.5" Fabric/Cord Clip
Réf. 9012201

60mm Octagonal LT50 Set
Réf. 9012233

DS 78 LT50 Set
Réf. 9012239

Flexible Intermediate Bracket Kit for Angle up to 45
Réf. 9012319

Intermediate Bracket Ceiling Mount 55P
Réf. 9014120

LT50 Drive 70mm Rollerbat
Réf. 9016059

LT50 Crown 80mm Rollerbat
Réf. 9019555

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 24 ft.
Réf. 9020793

LT50 Idler Bracket with 10mm Hole Nylon Bearing
Réf. 9410635

Heavy Duty Angle Bracket for 9430610
Réf. 9420604

Heavy Duty LT Intermediate Support Bracket
Réf. 9420673

Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)
Réf. 9420814

Spring Ring with Loop
Réf. 9685025

60mm Octagonal Drive
Réf. 9751001

SM65 (63mm) Round Drive
Réf. 9751002

AMA/P71 LT50 Drive
Réf. 9751015

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - Mill Finish
Réf. 1780743

LT50 Intermediate Bracket with 16mm ID Bearing
Réf. 9002541

Modified LT60 DS 78 Drive (Key Way Widened)
Réf. 9012241

70mm Octagonal LT50 Crown
Réf. 9012328

Sonesse® 50 Adjustable Idler End Bracket - Ceiling Mount 55P
Réf. 9014110

Intermediate Bracket Ceiling Mount 55P, 0-90 Degrees
Réf. 9014122

RollEase “Silent Pin" Idler Bracket (Wall and Ceiling Mount) (White)
Réf. 9016859

Sonesse® ULTRA 50 Universal Pin End Cap - 10mm.
Réf. 9019716

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft. (Black)
Réf. 9028738

2.0" Tube - 10mm Shaft End Cap
Réf. 9128101

Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632

2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019

LT50 2" Universal Intermediate Bracket Kit
Réf. 9410648

LT50 Universal Motor Bracket (50Nm Max)
Réf. 9410651

Roller Tube End Cap with 12mm Hole
Réf. 9701288

SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030

DS 85mm Round Crown
Réf. 9707035

Universal Motor Bracket (Metric) with Spring Ring and Threaded for M8 and M6 Bolts
Réf. 9910001

Drive Stop and Screw
Réf. 9910004

AMA/P71 LT50 Crown
Réf. 9997118

White Plastic Cover for LT Bracket
Réf. 9002519

DS 74 LT50 Set
Réf. 9012238

2" Collapsible End Cap (Silent) - 10mm Shaft
Réf. 9013592

Idler End Cap (for 56mm Acmeda Tube)
Réf. 9014097

Intermediate Male Idler End Plug (for 56mm Acmeda tube)
Réf. 9014114

Intermediate Female Idler End Plug (for 56mm Acmeda tube)
Réf. 9014121

RollEase "Silent Pin" Crown & Drive Adaptor for 2.5" (63mm) Tube
Réf. 9015234

Sonesse® 50 Pin End Cap 10mm - Quiet Accessory for 2" Tube
Réf. 9016628

RollEase “Silent Pin" Crown & Drive Adaptor for 3.25" (83mm) Tube
Réf. 9016855

RollEase “Silent Pin" Idler End Pin
Réf. 9016857

Sonesse® 50 Drive Wheel 50mm x 1.5mm Soft Clip- Quiet Accessory for Sonesse® Motors
Réf. 9018455

Fast Connector Extension Cable 3C SJTW without NEMA Plug - 8.4 ft.
Réf. 9021157

2.0" Fabric/Cord Clip
Réf. 9138028

Intermediate Bearing Support for 1781018
Réf. 9146011

Weld-on Bracket without Spring Ring
Réf. 9206029

Spring Ring
Réf. 9206033

LT50 Idler Bracket with 12mm Hole Nylon Bearing
Réf. 9410633

LT50 HA Flush Mount Motor Bracket
Réf. 9410715

2.5" 60mm Octagonal Crown
Réf. 9707025

DS 78mm Round Crown
Réf. 9707027

Motor Bracket with Spring Ring - Square (100mm x 100mm)
Réf. 9763508

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011
Réf. 1781018

Ball Support for 9410803 and 9028665
Réf. 1781030

Standard Motor Tester Cable, 4-Wire
Réf. 9012116

2.75" (67mm) Round LT50 Set "Hard Clip"
Réf. 9012232

DS70 LT50 Set (0.8mm - 1mm Kit)
Réf. 9012237

Sonesse® 50 Pin End Cap 12mm - Quiet Accessory for 2" Tube
Réf. 9018228

LT50 Drive 80mm Rollerbat
Réf. 9019556

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 18 ft.
Réf. 9020792

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 1.5 ft.
Réf. 9021049

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 4.4 ft.
Réf. 9021114

Tool for WAGO AC Quick Connector
Réf. 9027663

14mm Bearing Plate for Idler Bracket Kit
Réf. 9146007

LT50 Adjustable Angle Bracket
Réf. 9410639

DS 78mm/R Round Drive
Réf. 9761005

P72 LT50 Drive
Réf. 9761011

Motor Bracket with Spring Ring - Square (120mm x 120mm)
Réf. 9763503

13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009

Take-Up Reel for 2" Tube
Réf. 1781151

2.5" OD Aluminum Tube (Minimum Order Length 16')
Réf. 1781343

Cord Take-Up Reel for 56mm Tube
Réf. 1781899

4-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012110

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 10.4 ft.
Réf. 9020791

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 18 ft.
Réf. 9021052

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 1.4 ft.
Réf. 9021113

LT50 Crown 70mm Rollerbat
Réf. 9026982

Grey WAGO AC Quick Connector (4 pins)
Réf. 9027664

U Shaped Idler Bracket
Réf. 9127808

Idler End Cap without Shaft 2.0" OD with M5 Screw
Réf. 9129631

2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041

2" (47mm) Round Drive "Hard Clip"
Réf. 9206088

LT Motor Bracket
Réf. 9410665

Heavy Duty Idler Bracket with Idler End Cap Holder
Réf. 9430603

LT Compact ST Motor Bracket PA66 with Spring Ring
Réf. 9708461

70mm Octagonal Drive
Réf. 9761002

DS 78mm/D Round Drive
Réf. 9761004

Spring Ring with Locking Screw
Réf. 9910002

LT50 RH "LO" Plate with Stud (Gold)
Réf. 9910016

Universal Motor Bracket - US Threads
Réf. 9910021

Sonesse® 50 Adjuster Tool (for Idler Brackets and End Plugs)
Réf. 1780742

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - White Powder Coat
Réf. 1780744

Idler Bearing for 12mm Shaft
Réf. 1781015

Cord Fastener for 56mm Tube
Réf. 1781408

3-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012111

P72 LT50 Set
Réf. 9012235

70mm LT50 Crown
Réf. 9016298

Sonesse® ULTRA 50 Universal Pin End Cap - 12mm
Réf. 9019717

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft.
Réf. 9020985

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 10 ft.
Réf. 9021051

Panel Mount, 3C Female Fast Connector
Réf. 9026398

Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665

Cable Guide for 63mm x 1.5mm (approx 2.5") Tube
Réf. 9146071

LO LT50 Motor Bracket with Stud (25 Nm max.)
Réf. 9206020

Light Duty Angle LT50 Type
Réf. 9410637

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801

Screw for Standard LT50 Motor
Réf. 9670013

2.0" Plastic Idler End Cap - 10mm Shaft
Réf. 9700958

Anti-Blocking System (ABS) 500 Series Left Rotation
Réf. 9705415

DS 78mm Round Drive
Réf. 9761001

RollEase 3.25" (83mm) Profiled Tube
Réf. 1782096

LT50 Adjustable Universal Motor Bracket
Réf. 9002550

LT50 Adjustable Intermediate Support Bracket for 2" Tube
Réf. 9012203

2.5" (60mm) Round LT50 Set "Hard Clip"
Réf. 9012231

70mm Octagonal LT50 Set
Réf. 9012234

LT50 Angle Plate for Motor Bracket
Réf. 9012250

Flexible Intermediate Bracket Kit for Angle up to 30
Réf. 9012318

Idler Bracket Kit 10mm (Ball & Holder)
Réf. 9012657

Non-Adjustable Idler End Bracket 55P
Réf. 9014683

RollEase “Silent Pin" Crown Only for RollEase 2.5" (63mm) Tube
Réf. 9016856

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 6 ft.
Réf. 9021050

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 8.4 ft.
Réf. 9021115

Cable Guide for 50 x 1.5mm (approx. 2" ID) Tube
Réf. 9146035

Pull Off Tool for Spring Ring
Réf. 9206015

2" (47mm) Round Drive "Soft Clip"
Réf. 9206089

Nylon ball bearing 10mm ID for 1781030
Réf. 9410803

3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303

Heavy Duty Angle Plate with Universal Motor Bracket (Max 85Nm)
Réf. 9420602

Heavy Duty End Cap Shaft
Réf. 9420674

Idler End Cap Holder (Anti-Vibration)
Réf. 9540786

2.5" (60mm) Round Crown
Réf. 9707026

DS 85mm Round Drive
Réf. 9761003