Products
Ref : 1038170 - 550R2 ALTUS RTS 50/14SJTW 10FT
Altus® RTS 550R2
Tubular motor typically used for exterior applications.
LT50 Altus is a tubular motor with no need for an electrician. Compatibility with the full range of RTS controls and accessories.
Applications | ||
---|---|---|
Awning / Exterior Solar Screens / Interior Window Coverings : Shades / Projection screen / Retractable Insect Screens / Rolling shutter | ||
Embedded Technologies | Warranty | |
RTS | 5 years |
Product benefits
Easy Install
- Plug and play motor with no need for costly wiring.
- Interchangeable power cords, or a quick connector with extension options, provide multiple power cord lengths to meet installation demands.
- RTS provides wireless commands to eliminate control wiring.
- Limits easily set using a hand-held remote.
Comfort & Convenience
- Long range remote control doesn't require direct line of sight.
- Smartphone and tablet app available for quick and easy control even while away.
- Use natural voice commands to control RTS motorized solutions with TaHoma.
Energy Savings
- Motorized exterior screens can potentially block up to 90% of solar rays.
- Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
- Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.
Protection
- Motorized retractable awnings and exterior screens not only shield occupants from the sun, but offer a cool, comfortable outdoor living space.
- Motorized rolling shutters provide a rigid protective barrier for any space and protect from storm damage.

What is the carbon footprint?
The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.
Details and specifications
Comfort & Convenience
- Convenient solution for glare reduction and privacy.
- Superior performance, reliability and ease of operation.
- Close and open all window treatments with a single gesture.
- Remotely control RTS products from any mobile device.
- Use natural voice commands to control RTS motorized solutions by adding TaHoma.
Energy Savings
- Utilize timers to schedule daily open and close times to control natural light and lower energy bills.
- Motorized exterior screens can potentially block up to 90% of solar rays.
- Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
- Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.
Protection
- Add a sun sensor to control UV rays and protect furnishings automatically.
- Add a wind sensor to protect end products from damage.
- Motorized rolling shutters provide a rigid protective barrier for any space.
Other documents & links
Installation information
Downloads & videos
Act for Green
Technical information
Approval |
---|
UR |
Standard |
|
---|---|
Protection Index | IP 44 |
Insulation class | Class I |
Dimension |
|
---|---|
Unwrapped product weight | 5.6 lb |
Unwrapped length | 26.57 in |
Unwrapped width | 2.48 in |
Unwrapped height | 2.48 in |
Minimum internal diameter | 1.85 in |
External Diameter | 1.77 in |
Diameter | 1.97 in |
Riveting position distance | 25.98 in |
Technology |
|
---|---|
Radio Frequency | RTS 433.42 MHz |
Number of channels | 12 |
Range in open field | 656.2 ft |
Coding | Rolling code 16 million of possibilities |
Electrical |
|
---|---|
Consumption during operation | 250 W |
Consumption in standby mode | 0 W |
Minimum voltage | 108 V |
Maximum voltage | 132 V |
Rated current | 2.1 A |
Power supply | AC - RGE 2 - 120V/60HZ |
Antenna | Integrated |
Mechanical |
|
---|---|
Speed | 14 rpm |
Torque | 50 Nm |
Type of limit switch unit | Electronic |
Capacity of the limit switch unit (turns) | 250 |
Power scale | AC MOTOR MULTI PHASE 37,5W TO 750W |
Repeatabilty | < +/- 3 |
Head type | STAR |
Thermal tripping | 284 °F |
Cable |
|
---|---|
Cable type | SJTW |
Removable cable | Yes |
Cable length | 9.84 ft |
Cable color | WHITE |
Number of wires of the cable | 3 |
Cable plug ends | STRIPPED |
Wire section | 0.0012 in² |
Other |
|
---|---|
Minimum working temperature | -4 °F |
Maximum working temperature | 158 °F |
Minimum storing temperature | -4 °F |
Maximum storing temperature | 176 °F |
Thermical time | 5 min |
Shape | TUBULAR |
Noise level (dB) | 55 dB |
Accessories
152 Product(s)
56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - White Powder Coat
Réf. 1780744

Cord Take-Up Reel for 56mm Tube
Réf. 1781899

LT50 Intermediate Bracket with 16mm ID Bearing
Réf. 9002541

LT50 Adjustable Intermediate Support Bracket for 2" Tube
Réf. 9012203

DS 74 LT50 Set
Réf. 9012238

Modified LT60 DS 78 Drive (Key Way Widened)
Réf. 9012241

70mm Octagonal LT50 Crown
Réf. 9012328

2" Collapsible End Cap (Silent) - 10mm Shaft
Réf. 9013592

RollEase “Silent Pin" Crown & Drive Adaptor for 3.25" (83mm) Tube
Réf. 9016855

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 10.4 ft.
Réf. 9020791

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 8.4 ft.
Réf. 9021115

Fast Connector Extension Cable 3C SJTW without NEMA Plug - 8.4 ft.
Réf. 9021157

Panel Mount, 3C Female Fast Connector
Réf. 9026398

LT50 Crown 70mm Rollerbat
Réf. 9026982

Idler End Cap without Shaft 2.0" OD with M5 Screw
Réf. 9129631

2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019

LO LT50 Motor Bracket with Stud (25 Nm max.)
Réf. 9206021

2" (47mm) Round Drive "Soft Clip"
Réf. 9206089

LT Motor Bracket
Réf. 9410665

Nylon ball bearing 10mm ID for 1781030
Réf. 9410803

Heavy Duty Angle Plate with Universal Motor Bracket (Max 85Nm)
Réf. 9420602

2.5" 60mm Octagonal Crown
Réf. 9707025

LT Compact ST Motor Bracket PA66 with Spring Ring
Réf. 9708461

Motor Bracket with Spring Ring - Square (100mm x 100mm)
Réf. 9763508

Sonesse® 50 Adjuster Tool (for Idler Brackets and End Plugs)
Réf. 1780742

Idler Bearing for 12mm Shaft
Réf. 1781015

Cord Fastener for 56mm Tube
Réf. 1781408

3-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012111

2.5" Fabric/Cord Clip
Réf. 9012201

LT50 Drive 70mm Rollerbat
Réf. 9016059

70mm LT50 Crown
Réf. 9016298

RollEase “Silent Pin" Idler Bracket (Wall and Ceiling Mount) (White)
Réf. 9016859

Sonesse® 50 Drive Wheel 50mm x 1.5mm Soft Clip- Quiet Accessory for Sonesse® Motors
Réf. 9018455

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft.
Réf. 9020985

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 10 ft.
Réf. 9021051

Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665

Weld-on Bracket without Spring Ring
Réf. 9206029

Idler End Cap Holder (Anti-Vibration)
Réf. 9540786

DS 78mm Round Drive
Réf. 9761001

DS 85mm Round Drive
Réf. 9761003

P72 LT50 Drive
Réf. 9761011

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011
Réf. 1781018

2.0" Aluminum Tube (Minimum Order Length 20')
Réf. 1781148

2.5" OD Aluminum Tube (Minimum Order Length 16')
Réf. 1781343

White Plastic Cover for LT Bracket
Réf. 9002519

4-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012110

60mm Octagonal LT50 Set
Réf. 9012233

RollEase “Silent Pin" Idler End Pin
Réf. 9016857

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 18 ft.
Réf. 9020792

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 1.4 ft.
Réf. 9021113

2.0" End Cap with 12mm Shaft
Réf. 9132087

Spring Ring
Réf. 9206033

2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041

2" (47mm) Round Drive "Hard Clip"
Réf. 9206088

3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303

Nylon Ball Bearing and Holder with 12mm Hole for 9420604
Réf. 9430610

DS 78mm Round Crown
Réf. 9707027

70mm Octagonal Drive
Réf. 9761002

DS 78mm/D Round Drive
Réf. 9761004

Universal Motor Bracket - US Threads
Réf. 9910021

13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009

Idler Bracket 14mm ID
Réf. 9002540

Standard Motor Tester Cable, 4-Wire
Réf. 9012116

DS 78 LT50 Set
Réf. 9012239

Sonesse® 50 Adjustable Idler End Bracket - Ceiling Mount 55P
Réf. 9014110

RollEase “Silent Pin" Star Head Motor Bracket (White)
Réf. 9016858

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft.
Réf. 9018190

Sonesse® 50 Pin End Cap 12mm - Quiet Accessory for 2" Tube
Réf. 9018228

LT50 Drive 80mm Rollerbat
Réf. 9019556

Sonesse® ULTRA 50 Universal Pin End Cap - 10mm.
Réf. 9019716

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 1.5 ft.
Réf. 9021049

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 18 ft.
Réf. 9021052

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 4.4 ft.
Réf. 9021114

U Shaped Idler Bracket
Réf. 9127808

2.0" Tube - 10mm Shaft End Cap
Réf. 9128101

Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632

14mm Bearing Plate for Idler Bracket Kit
Réf. 9146007

LT50 Adjustable Angle Bracket
Réf. 9410639

4.0" Round LT50 Drive
Réf. 9420304

Spring Ring with Loop
Réf. 9685025

Roller Tube End Cap with 12mm Hole
Réf. 9701288

SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030

DS 85mm Round Crown
Réf. 9707035

SM65 (63mm) Round Drive
Réf. 9751002

DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005

AMA/P71 LT50 Drive
Réf. 9751015

DS 78mm/R Round Drive
Réf. 9761005

Spring Ring with Locking Screw
Réf. 9910002

RollEase 3.25" (83mm) Profiled Tube
Réf. 1782096

LT50 Adjustable Universal Motor Bracket
Réf. 9002550

LT50 Angle Plate for Motor Bracket
Réf. 9012250

Idler End Cap (for 56mm Acmeda Tube)
Réf. 9014097

Sonesse® 50 Star Head Motor Bracket 55P
Réf. 9014135

Non-Adjustable Idler End Bracket 55P
Réf. 9014683

RollEase “Silent Pin" Crown Only for RollEase 2.5" (63mm) Tube
Réf. 9016856

Grey WAGO AC Quick Connector (4 pins)
Réf. 9027664

2.0" Fabric/Cord Clip
Réf. 9138028

Intermediate Bearing Support for 1781018
Réf. 9146011

Pull Off Tool for Spring Ring
Réf. 9206015

LT50 Idler Bracket with 12mm Hole Nylon Bearing
Réf. 9410633

LT50 2" Universal Intermediate Bracket Kit
Réf. 9410648

LT50 HA Flush Mount Motor Bracket
Réf. 9410715

Universal Motor Bracket with Spring Ring
Réf. 9420631

Heavy Duty End Cap Shaft
Réf. 9420674

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800

Heavy Duty Idler Bracket with Idler End Cap Holder
Réf. 9430603

Drive Stop and Screw
Réf. 9910004

CMO Motor Limit Setting Tool
Réf. 9910019

56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - Mill Finish
Réf. 1780743

2.5" (60mm) Round LT50 Set "Hard Clip"
Réf. 9012231

70mm Octagonal LT50 Set
Réf. 9012234

Idler Bracket Kit 10mm (Ball & Holder)
Réf. 9012657

Intermediate Male Idler End Plug (for 56mm Acmeda tube)
Réf. 9014114

Intermediate Bracket Ceiling Mount 55P, 0-90 Degrees
Réf. 9014122

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 24 ft. (Black)
Réf. 9028738

LO LT50 Motor Bracket with Stud (25 Nm max.)
Réf. 9206020

Heavy Duty LT Intermediate Support Bracket
Réf. 9420673

60mm Octagonal Drive
Réf. 9751001

Universal Motor Bracket (Metric) with Spring Ring and Threaded for M8 and M6 Bolts
Réf. 9910001

AMA/P71 LT50 Crown
Réf. 9997118

Take-Up Reel for 2" Tube
Réf. 1781151

2.75" (67mm) Round LT50 Set "Hard Clip"
Réf. 9012232

P72 LT50 Set
Réf. 9012235

Intermediate Bracket Ceiling Mount 55P
Réf. 9014120

LT50 Crown 80mm Rollerbat
Réf. 9019555

Sonesse® ULTRA 50 Universal Pin End Cap - 12mm
Réf. 9019717

Fast Connector Extension Cable 3C SJTW with NEMA Plug - 24 ft.
Réf. 9020793

Tool for WAGO AC Quick Connector
Réf. 9027663

Cable Guide for 63mm x 1.5mm (approx 2.5") Tube
Réf. 9146071

LT50 Idler Bracket with 10mm Hole Nylon Bearing
Réf. 9410635

Light Duty Angle LT50 Type
Réf. 9410637

LT50 Universal Motor Bracket (50Nm Max)
Réf. 9410651

Heavy Duty Angle Bracket for 9430610
Réf. 9420604

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801

Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)
Réf. 9420814

Screw for Standard LT50 Motor
Réf. 9670013

2.0" Plastic Idler End Cap - 10mm Shaft
Réf. 9700958

Ball Support for 9410803 and 9028665
Réf. 1781030

DS70 LT50 Set (0.8mm - 1mm Kit)
Réf. 9012237

Intermediate Female Idler End Plug (for 56mm Acmeda tube)
Réf. 9014121

RollEase "Silent Pin" Crown & Drive Adaptor for 2.5" (63mm) Tube
Réf. 9015234

Sonesse® 50 Pin End Cap 10mm - Quiet Accessory for 2" Tube
Réf. 9016628

Sonesse® 50 & LT50 RTS/RS485 Motor Pigtail to Fast Connector SJTW 3C Cable - 1.6 ft.
Réf. 9020803

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 6 ft.
Réf. 9021050

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable with NEMA Plug - 24 ft.
Réf. 9021053

Sonesse® 50 & LT50/LT60 RTS/RS485 SJTW 3C Cable - 10 ft. (Black)
Réf. 9028737

Motor Bracket "U" Shape
Réf. 9510658

2.5" (60mm) Round Crown
Réf. 9707026

2.75" (67mm) Round Crown
Réf. 9707031

DS 70 LT50 Crown
Réf. 9707034

Motor Bracket with Spring Ring - Square (120mm x 120mm)
Réf. 9763503

LT50 RH "LO" Plate with Stud (Silver)
Réf. 9910017