< Products

Sonesse® 506S2 RH - 1001812 - 1 - Somfy
Sonesse® 506S2 RH - 1001812 - 1 - Somfy
Sonesse® 506S2 RH - 1001812 - 2 - Somfy

Ref : 1001812 - 506S2 SONESSE RH 6/32 SJTW 3M

Sonesse® 506S2 RH

ULTRA-quiet, ULTRA-strong

Experience all the benefits of the Sonesse® range for large multi-banded/coupled window covering applications.

More about
Applications
Interior Window Coverings : Shades
Embedded Technologies Warranty
Wired 5 years

Product benefits

Multiple Applications

  • Interior, Exterior, Residential, and Commercial.

Simple Installation & Setup

  • Compatible with leading industry hardware.
  • Can be mounted in the bracket six different ways.
  • Features a "snap-on" style connection for roller tube adaptors.
  • Interchangeable power cords, or a quick connector with extension options, provide multiple power cord lengths to meet installation demands.
  • Limits can be set using mechanical rapid adjustment.
  • Suitable for tubes diameter 47mm or more (internal diameter).

Compatibility

  • Compatible with wired control options.
  • Easily integrates with third-party control systems.
  • No power consumption when motor is idle, a green solution.
Act For Green cycle
The carbon impact of the 506S2 SONESSE RH 6/32 SJTW 3M is 26.1kg CO2

What is the carbon footprint?

The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.

Details and specifications

Weight (with packaging) : 4.75 lb

Comfort & Convenience

  • Convenient solution for glare reduction and privacy.
  • Superior performance, reliability and ease of operation.
  • Close and open all window treatments with a single gesture.

Quiet

  • At the office or at home, silence is a key factor for well being. The Sonesse® range offers an added value of acoustic performance to quality and compatibility.

Energy Savings

  • Energy costs reduction and protecting furnishings from damaging UV rays.
  • Utilize timers to schedule daily open and close times.
  • Add sensors that react to the sun's intensity & positioning.

Other documents & links

Product presentation

Installation information

Act for Green

Technical information

Approval
UR

Standard
Protection Index IP 44  
Insulation class Class I  

Dimension
Unwrapped product weight 4.75 lb  
Unwrapped length 24.13 in  
Unwrapped width 1.93 in  
Unwrapped height 1.93 in  
Minimum internal diameter 1.85 in  
External Diameter 1.77 in  
Diameter 1.97 in  
Riveting position distance 23.23 in  

Electrical
Consumption during operation 140 W  
Consumption in standby mode 0 W  
Minimum voltage 108 V  
Maximum voltage 132 V  
Rated current 1.2 A  
Power supply AC - RGE 2 - 120V/60HZ  

Mechanical
Speed 32 rpm  
Torque 6 Nm  
Type of limit switch unit Mechanical  
Capacity of the limit switch unit (turns) 46  
Power scale AC MOTOR SINGLE PHASE 37,5W TO 750W  
Repeatabilty +/- 5  
Head type ROUND  

Cable
Cable type SJTW  
Cable length 9.84 ft  
Cable color WHITE  
Number of wires of the cable 4  
Cable plug ends STRIPPED  
Wire section 0.0013 in²  

Other
Minimum working temperature -4 °F  
Maximum working temperature 140 °F  
Minimum storing temperature -4 °F  
Maximum storing temperature 176 °F  
Thermical time 4 min  
Noise level (dB) 45 dB  

Accessories

118 Product(s)
13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009
Idler Bracket 14mm ID
Réf. 9002540
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
DS 78 LT50 Set
Réf. 9012239
LT50 Drive 70mm Rollerbat
Réf. 9016059
RollEase “Silent Pin" Star Head Motor Bracket (White)
Réf. 9016858
Sonesse® 50 Pin End Cap 12mm - Quiet Accessory for 2" Tube
Réf. 9018228
LT50 Drive 80mm Rollerbat
Réf. 9019556
Sonesse® ULTRA 50 Universal Pin End Cap - 10mm.
Réf. 9019716
U Shaped Idler Bracket
Réf. 9127808
2.0" Tube - 10mm Shaft End Cap
Réf. 9128101
Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632
14mm Bearing Plate for Idler Bracket Kit
Réf. 9146007
LT50 Adjustable Angle Bracket
Réf. 9410639
4.0" Round LT50 Drive
Réf. 9420304
Roller Tube End Cap with 12mm Hole
Réf. 9701288
Anti-Blocking System (ABS) 500 Series Right Rotation
Réf. 9705414
DS 85mm Round Crown
Réf. 9707035
SM65 (63mm) Round Drive
Réf. 9751002
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
AMA/P71 LT50 Drive
Réf. 9751015
DS 78mm/R Round Drive
Réf. 9761005
13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011
Réf. 1781018
2.0" Aluminum Tube (Minimum Order Length 20')
Réf. 1781148
2.5" OD Aluminum Tube (Minimum Order Length 16')
Réf. 1781343
4-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012110
60mm Octagonal LT50 Set
Réf. 9012233
RollEase “Silent Pin" Idler End Pin
Réf. 9016857
Fast Connector Extension Cable 4C SJTW - 22.4 ft.
Réf. 9021121
2.0" End Cap with 12mm Shaft
Réf. 9132087
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303
Nylon Ball Bearing and Holder with 12mm Hole for 9420604
Réf. 9430610
2.5" 60mm Octagonal Crown
Réf. 9707025
DS 78mm Round Crown
Réf. 9707027
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
LT50 RH "LO" Plate with Stud (Gold)
Réf. 9910016
Idler Bearing for 12mm Shaft
Réf. 1781015
Cord Fastener for 56mm Tube
Réf. 1781408
2.5" Fabric/Cord Clip
Réf. 9012201
Sonesse® 50 Drive (for 56mm Acmeda Tube 10Nm Max)
Réf. 9014126
70mm LT50 Crown
Réf. 9016298
RollEase “Silent Pin" Idler Bracket (Wall and Ceiling Mount) (White)
Réf. 9016859
Sonesse® 50 Drive Wheel 50mm x 1.5mm Soft Clip- Quiet Accessory for Sonesse® Motors
Réf. 9018455
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
Idler End Cap Holder (Anti-Vibration)
Réf. 9540786
2.0" Plastic Idler End Cap - 10mm Shaft
Réf. 9700958
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
P72 LT50 Drive
Réf. 9761011
56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - White Powder Coat
Réf. 1780744
Cord Take-Up Reel for 56mm Tube
Réf. 1781899
LT50 Intermediate Bracket with 16mm ID Bearing
Réf. 9002541
LT50 Adjustable Intermediate Support Bracket for 2" Tube
Réf. 9012203
DS 74 LT50 Set
Réf. 9012238
Modified LT60 DS 78 Drive (Key Way Widened)
Réf. 9012241
70mm Octagonal LT50 Crown
Réf. 9012328
2" Collapsible End Cap (Silent) - 10mm Shaft
Réf. 9013592
Sonesse® 50 Drive Wheel 50mm x 1.5mm Hard Clip- Quiet Accessory for Sonesse® Motors
Réf. 9016630
RollEase “Silent Pin" Crown & Drive Adaptor for 3.25" (83mm) Tube
Réf. 9016855
Sonesse® 50 & LT50/LT60 SJTW 4C Cable - 24 ft.
Réf. 9021046
Fast Connector Extension Cable 4C SJTW - 4.4 ft.
Réf. 9021117
Fast Connector Extension Cable 4C SJTW - 16.4 ft.
Réf. 9021120
LT50 Crown 70mm Rollerbat
Réf. 9026982
Idler End Cap without Shaft 2.0" OD with M5 Screw
Réf. 9129631
2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019
LT Motor Bracket
Réf. 9410665
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
56mm OD Aluminum Sonesse® 50 Tube (16 ft. Lengths) - Mill Finish
Réf. 1780743
2.5" (60mm) Round LT50 Set "Hard Clip"
Réf. 9012231
70mm Octagonal LT50 Set
Réf. 9012234
Idler Bracket Kit 10mm (Ball & Holder)
Réf. 9012657
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
Heavy Duty LT Intermediate Support Bracket
Réf. 9420673
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
60mm Octagonal Drive
Réf. 9751001
AMA/P71 LT50 Crown
Réf. 9997118
RollEase 3.25" (83mm) Profiled Tube
Réf. 1782096
LT50 Angle Plate for Motor Bracket
Réf. 9012250
Idler End Cap (for 56mm Acmeda Tube)
Réf. 9014097
Sonesse® 50 Crown (for 56mm Acmeda Tube 10Nm Max)
Réf. 9014125
RollEase “Silent Pin" Crown Only for RollEase 2.5" (63mm) Tube
Réf. 9016856
Sonesse® 50 & LT50/LT60 SJTW 4C Cable - 10 ft.
Réf. 9018345
Sonesse® 50 & LT50 Motor Pigtail to Fast Connector SJTW 4C Cable - 1.6 ft.
Réf. 9020804
Grey WAGO AC Quick Connector (4 pins)
Réf. 9027664
2.0" Fabric/Cord Clip
Réf. 9138028
Intermediate Bearing Support for 1781018
Réf. 9146011
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
LT50 Idler Bracket with 12mm Hole Nylon Bearing
Réf. 9410633
LT50 2" Universal Intermediate Bracket Kit
Réf. 9410648
Heavy Duty End Cap Shaft
Réf. 9420674
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
Heavy Duty Idler Bracket with Idler End Cap Holder
Réf. 9430603
Anti-Blocking System (ABS) 500 Series Left Rotation
Réf. 9705415
Drive Stop and Screw
Réf. 9910004
Take-Up Reel for 2" Tube
Réf. 1781151
2.75" (67mm) Round LT50 Set "Hard Clip"
Réf. 9012232
P72 LT50 Set
Réf. 9012235
LT50 Crown 80mm Rollerbat
Réf. 9019555
Sonesse® ULTRA 50 Universal Pin End Cap - 12mm
Réf. 9019717
Fast Connector Extension Cable 4C SJTW - 8.4 ft.
Réf. 9021118
Tool for WAGO AC Quick Connector
Réf. 9027663
Cable Guide for 63mm x 1.5mm (approx 2.5") Tube
Réf. 9146071
LT50 Idler Bracket with 10mm Hole Nylon Bearing
Réf. 9410635
Light Duty Angle LT50 Type
Réf. 9410637
LT50 Universal Motor Bracket (50Nm Max)
Réf. 9410651
Heavy Duty Angle Bracket for 9430610
Réf. 9420604
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
Universal End Cap - Collapsible 10mm Shaft (Shorter Pin than Item 9420800)
Réf. 9420814
Ball Support for 9410803 and 9028665
Réf. 1781030
DS70 LT50 Set (0.8mm - 1mm Kit)
Réf. 9012237
Sonesse® 50 Pin End Cap 10mm - Quiet Accessory for 2" Tube
Réf. 9016628
Motor Bracket "U" Shape
Réf. 9510658
2.5" (60mm) Round Crown
Réf. 9707026
2.75" (67mm) Round Crown
Réf. 9707031
DS 70 LT50 Crown
Réf. 9707034
LT50 RH "LO" Plate with Stud (Silver)
Réf. 9910017