< Products

535A2 RTS CMO - 1047306 - 1 - Somfy
535A2 RTS CMO - 1047306 - 1 - Somfy
Video
Video
Video
Video
Video

Ref : 1047306 - 535A2 RTS CMO 35/20 SJTW 12 FT

535A2 RTS CMO

Motor with built-in RTS featuring a compact manual overide

LT50 RTS CMO tubular motors have RTS built-in and feature a compact manual override (CMO).

More about
Applications
Awning / Rolling shutter
Embedded Technologies Warranty
RTS 5 years

Product benefits

Easy to Install & Use

  • Premier choice for hurricane shutters and retractable awnings.
  • 120V tubular motor with built-in RTS.
  • Features a compact manual override (CMO) which allows users to operate the motorized application manually when power is not available.
  • This motor can be plugged into a standard wall outlet or hard-wired. 
  • Detachable power cable to easily manage wire length or replace if needed.
  • Easily integrates with most home automation systems.
  • Compatible with full range of RTS controls and accessories.
  • Easily set and adjust limits using rapid push-buttons.
Act For Green cycle
The carbon impact of the 535A2 RTS CMO 35/20 SJTW 12 FT is 84.6kg CO2

What is the carbon footprint?

The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.

Details and specifications

Weight (with packaging) : 7.14 lb

Energy Savings

  • Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
  • Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Comfort & Convenience

  • Long range remote control doesn't require direct line of sight.
  • Remotely control RTS products from any mobile device.
  • Use natural voice commands to control RTS motorized solutions by adding TaHoma.
  • Easily integrates with most home automation systems.
  • Premier choice for hurricane shutters.
  • Features a compact manual overide (CMO) which allows you to operate the motorized application manually when power is not available.

Other documents & links

Installation information

Downloads & videos

Act for Green

Technical information

Approval
UR

Standard
Protection Index IP 44  
Insulation class Class I  

Dimension
Unwrapped product weight 3.24 lb  
Unwrapped length 30.47 in  
Minimum internal diameter 1.85 in  
External Diameter 1.77 in  
Diameter 1.97 in  
Riveting position distance 29.88 in  

Technology
Radio Frequency 433.420 MHz  
Number of channels 12  
Range in open field 0.16 ft  
Coding Rolling code 16 million of possibilities  

Electrical
Consumption during operation 250 W  
Consumption in standby mode 0 W  
Minimum voltage 108 V  
Maximum voltage 126 V  
Rated current 2.1 A  
Power supply AC - RGE 2 - 120V/60HZ  
Antenna Integrated  

Mechanical
Speed 20 rpm  
Torque 35 Nm  
Capacity of the limit switch unit (turns) 34  
Power scale AC MOTOR MULTI PHASE 37,5W TO 750W  
Repeatabilty +/- 5  
Head type CMO  
Thermal tripping 284 °F  

Cable
Cable type SJTW  
Removable cable Yes  
Cable length 11.48 ft  
Cable color WHITE  
Number of wires of the cable 3  
Wire section 0.0012 in²  

Other
Minimum working temperature -13 °F  
Maximum working temperature 158 °F  
Minimum storing temperature -4 °F  
Maximum storing temperature 176 °F  
Thermical time 5 min  
Shape TUBULAR  

End Product
End product Width 0.2 in  

Accessories

82 Product(s)
Ball Support for 9410803 and 9028665
Réf. 1781030
DS70 LT50 Set (0.8mm - 1mm Kit)
Réf. 9012237
CMO Awning Override Kit (U.S. Threads)
Réf. 9012348
LT50 Crown 70mm Rollerbat
Réf. 9026982
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
4.0" Round LT50 Drive
Réf. 9420304
2.5" (60mm) Round Crown
Réf. 9707026
2.75" (67mm) Round Crown
Réf. 9707031
Idler Bearing for 12mm Shaft
Réf. 1781015
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
2.75" (67mm) Round LT50 Set "Hard Clip"
Réf. 9012232
P72 LT50 Set
Réf. 9012235
LT50 Drive 70mm Rollerbat
Réf. 9016059
LT50 Crown 80mm Rollerbat
Réf. 9019555
U Shaped Idler Bracket
Réf. 9127808
14mm Bearing Plate for Idler Bracket Kit
Réf. 9146007
LT50 Idler Bracket with 10mm Hole Nylon Bearing
Réf. 9410635
CMO Awning Motor Bracket - U.S. Threads
Réf. 9420648
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
CMO Awning Override Shaft (100mm Long) with Geiger Eye
Réf. 9707287
LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 18 ft.
Réf. 9012150
CMO Awning Kit without Awning Eye
Réf. 9012362
70mm LT50 Crown
Réf. 9016298
Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
CMO Awning Override Shaft (170mm Long)
Réf. 9685136
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
P72 LT50 Drive
Réf. 9761011
AMA/P71 LT50 Crown
Réf. 9997118
DS 74 LT50 Set
Réf. 9012238
CMO ME Awning Override Kit (U.S. Threads)
Réf. 9012349
Short Awning Override Shaft Ring
Réf. 9016332
LT50 CMO RTS SJTW 3C Cable - 24 ft.
Réf. 9021047
Idler End Cap without Shaft 2.0" OD with M5 Screw
Réf. 9129631
3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303
Heavy Duty Idler Bracket with Idler End Cap Holder
Réf. 9430603
2.5" 60mm Octagonal Crown
Réf. 9707025
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
Drive Stop and Screw
Réf. 9910004
CMO Motor Limit Setting Tool
Réf. 9910019
CMO ME Bracket
Réf. 9910041
13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 24 ft.
Réf. 9012149
DS 78 LT50 Set
Réf. 9012239
LT50 Drive 80mm Rollerbat
Réf. 9019556
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
Roller Tube End Cap with 12mm Hole
Réf. 9701288
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
DS 85mm Round Crown
Réf. 9707035
60mm Octagonal Drive
Réf. 9751001
SM65 (63mm) Round Drive
Réf. 9751002
AMA/P71 LT50 Drive
Réf. 9751015
DS 78mm/R Round Drive
Réf. 9761005
13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011
Réf. 1781018
LT50 CMO RTS Cable with 5-15P Right Angle NEMA Plug - 12 ft.
Réf. 9012148
60mm Octagonal LT50 Set
Réf. 9012233
LT50 CMO RTS SJTW 3C Cable - 10 ft.
Réf. 9021025
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
Nylon Ball Bearing and Holder with 12mm Hole for 9420604
Réf. 9430610
DS 78mm Round Crown
Réf. 9707027
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
3-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012111
70mm Octagonal LT50 Set
Réf. 9012234
Modified LT60 DS 78 Drive (Key Way Widened)
Réf. 9012241
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
Intermediate Bearing Support for 1781018
Réf. 9146011
2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019
Heavy Duty End Cap Shaft
Réf. 9420674
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
DMI Bracket 100mm x 100mm
Réf. 9706034
DS 70 LT50 Crown
Réf. 9707034
2.5" (60mm) Round LT50 Set "Hard Clip"
Réf. 9012231
70mm Octagonal LT50 Crown
Réf. 9012328
LT50 Idler Bracket with 12mm Hole Nylon Bearing
Réf. 9410633
Heavy Duty LT Intermediate Support Bracket
Réf. 9420673
CMO Awning Override Shaft (100mm Long)
Réf. 9685148