Products

535A2 CMO - 1047006 - 1 - Somfy

Ref : 1047006 - 535A2 35/20 CMO 2464 2M - UN

535A2 CMO

Standard 4 wire motor featuring a compact manual override

The LT50 CMO is a 120V/60Hz standard tubular motor featuring compact manual override to operate manually when power is not available.

Applications
Awning / Rolling shutter
Embedded Technologies	Warranty
Wired	5 years

Product benefits

Easy to Install & Use

Features a compact manual override (CMO) allowing operation in the event of a power failure.
A standard 4-wire motor is an ideal choice for preconstruction opportunities while the walls are open and operation with a wired switch is preferred.
Detachable power cable to easily manage wire length or replace if needed.
Standard control options include wired wall switches.
Easily set and adjust limits using rapid push-buttons.

Environmentally Friendly

Designed to save energy.
Doesn't consume power in standby mode.

Act For Green cycle

67.2* kg CO₂

The carbon impact of the 535A2 35/20 CMO 2464 2M - UN is 67.2kg CO2

What is the carbon footprint?

The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.

Details and specifications

Dimension

Weight (with packaging) : 0.01 lb

Help me to sell

Energy Savings

Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.

Comfort & Convenience

One wired wall switch can control all your shutters or awnings to eliminate the need to go room to room to open or close them.
Features a compact manual override (CMO) allowing operation in the event of a power failure.

Safety

Create a physical and psychological barrier between potential intruders and the valuables inside your home.

Other documents & links

Installation information

Act for Green

Technical information

Approval
UR

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Unwrapped product weight	7.14 lb
Unwrapped length	30.47 in
Unwrapped width	3.52 in
Unwrapped height	3.92 in
Minimum internal diameter	1.85 in
External Diameter	1.77 in
Diameter	1.97 in
Riveting position distance	25.55 in

Technology
Range in open field	0.16 ft

Electrical
Consumption during operation	250 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	126 V
Rated current	2.1 A
Power supply	AC - RGE 2 - 120V/60HZ

Mechanical
Speed	20 rpm
Torque	35 Nm
Type of limit switch unit	Quick limit switch
Capacity of the limit switch unit (turns)	34
Power scale	AC MOTOR MULTI PHASE 37,5W TO 750W
Repeatabilty	+/- 5
Head type	CMO
Thermal tripping	284 °F

Cable
Cable type	2464
Removable cable	Yes
Cable length	6.56 ft
Cable color	WHITE
Number of wires of the cable	4
Wire section	0.0012 in²

Other
Minimum working temperature	-13 °F
Maximum working temperature	158 °F
Minimum storing temperature	-4 °F
Maximum storing temperature	176 °F
Thermical time	5 min
Shape	TUBULAR

End Product
End product Width	0.2 in

Accessories

82 Product(s)

Connector Sleeve 7mm Hex to 8mm Square

CMO Awning Override Kit (U.S. Threads)

Sunea® RTS CMO Universal Bracket

LT50 Crown 70mm Rollerbat

U Shaped Idler Bracket

2.5" (60mm) Round Drive "Soft Clip"

2" (47mm) Round Drive "Hard Clip"

Nylon ball bearing 10mm ID for 1781030

Heavy Duty Idler Bracket with Idler End Cap Holder

2.75" (67mm) Round Crown

Idler Bearing for 12mm Shaft

Ball Support for 9410803 and 9028665

Universal Joint 7mm Hex to 8mm Square Connector

2.75" (67mm) Round LT50 Set "Hard Clip"

DS70 LT50 Set (0.8mm - 1mm Kit)

CMO Awning Motor Bracket - U.S. Threads

Extension Shaft 7mm Hex L=220mm with Screw

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

CMO Awning Override Shaft (100mm Long) with Geiger Eye

AMA/P71 LT50 Crown

Standard Motor Tester Cable, 4-Wire

CMO Motor Cable - 12 ft.

CMO Awning Kit without Awning Eye

70mm LT50 Crown

LT50 Crown 80mm Rollerbat

Nylon Ball Bearing 12mm ID for 1781030

14mm Bearing Plate for Idler Bracket Kit

Intermediate Bearing Support for 1781018

CMO Awning Override Shaft (170mm Long)

2.5" (60mm) Round LT50 Set "Hard Clip"

70mm Octagonal LT50 Set

2" (47mm) Round Drive "Soft Clip"

3.5" Round LT50/60 Drive (89mm x 2mm)

Heavy Duty End Cap Shaft

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

2.5" (60mm) Round Crown

DS 70 LT50 Crown

Drive Stop and Screw

CMO Motor Limit Setting Tool

13mm Square Drive Shaft - 12mm OD for End Cap

4-Conductor Motor Cable SJTW (Sold per Foot)

60mm Octagonal LT50 Set

LT50 Drive 70mm Rollerbat

LT50 Idler Bracket with 10mm Hole Nylon Bearing

Extension Shaft 7mm Hex L=330mm with Screw

Heavy Duty LT Intermediate Support Bracket

SM65 (63mm) Round Crown - 3 grooves

DS 85mm Round Crown

60mm Octagonal Drive

SM65 (63mm) Round Drive

AMA/P71 LT50 Drive

13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011

CMO Motor Cable - 6 ft.

CMO Motor Cable - 24 ft.

4.0" Round LT50 Drive

Nylon Ball Bearing and Holder with 12mm Hole for 9420604

DMI Bracket 100mm x 100mm

DS 70mm Round Drive (0.8mm - 1mm)

DS 78mm/R Round Drive

Modified LT60 DS 78 Drive (Key Way Widened)

70mm Octagonal LT50 Crown

Short Awning Override Shaft Ring

LT50 Drive 80mm Rollerbat

Idler End Cap without Shaft 2.5" OD with M5 Screw

2.5" Round LT50 Drive "Hard Clip"

Connector Sleeve 7mm Hex to 7mm Hex

CMO Awning Override Shaft (100mm Long)

Roller Tube End Cap with 12mm Hole

DS 78mm Round Drive

DS 85mm Round Drive

CMO ME Awning Override Kit (U.S. Threads)

Idler End Cap without Shaft 2.0" OD with M5 Screw

LT50 Idler Bracket with 12mm Hole Nylon Bearing

2.5" 60mm Octagonal Crown

DS 78mm Round Crown

70mm Octagonal Drive

DS 78mm/D Round Drive