Products
Ref : 1043010 - 525A2 25/20 CMO VVF 2M - UNIT
525A2 CMO
Standard 4 wire motor featuring a compact manual override
The LT50 CMO is a 120V/60Hz standard tubular motor featuring compact manual override to operate manually when power is not available.
| Applications | ||
|---|---|---|
| Awning / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| Wired | 5 years | |
Product benefits
Easy to Install & Use
- Features a compact manual override (CMO) allowing operation in the event of a power failure.
- A standard 4-wire motor is an ideal choice for preconstruction opportunities while the walls are open and operation with a wired switch is preferred.
- Detachable power cable to easily manage wire length or replace if needed.
- Standard control options include wired wall switches.
- Easily set and adjust limits using rapid push-buttons.
Environmentally Friendly
- Designed to save energy.
- Doesn't consume power in standby mode.
62.3*
kg CO2
The carbon footprint of the 525A2 25/20 CMO VVF 2M - UNIT is 62.3kg CO2* eq
This product has been eco-designed
Decarbonising our products is our commitment to reduce their environmental footprint throughout their entire life cycle. We place particular focus on the phases with the greatest carbon impact.
PEP Ecopassport® evaluates the product’s full environmental impact. A type III Environmental Product Declaration in accordance with ISO standards, it is validated by an accredited third party.
*This product has a specific CO₂ calculation. Find more details about this range in the PEP Ecopassport®.
Details and specifications
Weight (with packaging) : 6.62 lb
Energy Savings
- Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
- Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.
Comfort & Convenience
- One wired wall switch can control all your shutters or awnings to eliminate the need to go room to room to open or close them.
- Features a compact manual override (CMO) allowing operation in the event of a power failure.
Safety
- Create a physical and psychological barrier between potential intruders and the valuables inside your home.
Other documents & links
Installation information
PEP Ecopassport
Accessories
82 Product(s)
13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009
Modified LT60 DS 78 Drive (Key Way Widened)
Réf. 9012241
CMO Awning Override Kit (U.S. Threads)
Réf. 9012348
Short Awning Override Shaft Ring
Réf. 9016332
Idler End Cap without Shaft 2.0" OD with M5 Screw
Réf. 9129631
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
DS 85mm Round Crown
Réf. 9707035
AMA/P71 LT50 Crown
Réf. 9997118
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
DS 74 LT50 Set
Réf. 9012238
CMO ME Awning Override Kit (U.S. Threads)
Réf. 9012349
70mm LT50 Crown for Tube (with Groove)
Réf. 9017507
CMO Awning Motor Bracket - U.S. Threads
Réf. 9420648
CMO Awning Override Shaft (100mm Long)
Réf. 9685148
DS 78mm/R Round Drive
Réf. 9761005
60mm Octagonal LT50 Set
Réf. 9012233
DS 78 LT50 Set
Réf. 9012239
70mm Octagonal LT50 Crown
Réf. 9012328
LT50 Drive 70mm Rollerbat
Réf. 9016059
LT50 Crown 80mm Rollerbat
Réf. 9019555
Intermediate Bearing Support for 1781018
Réf. 9146011
2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019
LT50 Idler Bracket with 12mm Hole Nylon Bearing
Réf. 9410633
3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
2.5" 60mm Octagonal Crown
Réf. 9707025
DS 78mm Round Crown
Réf. 9707027
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632
CMO Motor Cable - 6 ft.
Réf. 9208302
CMO Motor Cable - 24 ft.
Réf. 9208308
4.0" Round LT50 Drive
Réf. 9420304
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
Nylon Ball Bearing and Holder with 12mm Hole for 9420604
Réf. 9430610
Roller Tube End Cap with 12mm Hole
Réf. 9701288
Anti-Blocking System (ABS) 500 Series Right Rotation
Réf. 9705414
DMI Bracket 100mm x 100mm
Réf. 9706034
2.75" (67mm) Round Crown
Réf. 9707031
DS 70 LT50 Crown
Réf. 9707034
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
AMA/P71 LT50 Drive
Réf. 9751015
Idler Bearing for 12mm Shaft
Réf. 1781015
4-Conductor Motor Cable SJTW (Sold per Foot)
Réf. 9012110
U Shaped Idler Bracket
Réf. 9127808
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
Heavy Duty Idler Bracket with Idler End Cap Holder
Réf. 9430603
CMO Awning Override Shaft (170mm Long)
Réf. 9685136
Anti-Blocking System (ABS) 500 Series Left Rotation
Réf. 9705415
CMO Awning Override Shaft (100mm Long) with Geiger Eye
Réf. 9707287
DS 78mm Round Drive
Réf. 9761001
CMO ME Bracket
Réf. 9910041
2.5" (60mm) Round LT50 Set "Hard Clip"
Réf. 9012231
70mm Octagonal LT50 Set
Réf. 9012234
LT50 Crown 70mm Rollerbat
Réf. 9026982
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
LT50 Idler Bracket with 10mm Hole Nylon Bearing
Réf. 9410635
Nylon ball bearing 10mm ID
Réf. 9410803
Heavy Duty LT Intermediate Support Bracket
Réf. 9420673
60mm Octagonal Drive
Réf. 9751001
SM65 (63mm) Round Drive
Réf. 9751002
13mm Sq. Intermediate Drive Shaft - 16mm OD for 9146011
Réf. 1781018
P72 LT50 Set
Réf. 9012235
Sunea® RTS CMO Universal Bracket
Réf. 9015802
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
Drive Stop and Screw
Réf. 9910004
CMO Motor Limit Setting Tool
Réf. 9910019
Ball Support
Réf. 1781030
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
CMO Motor Cable - 12 ft.
Réf. 9012137
2.75" (67mm) Round LT50 Set "Hard Clip"
Réf. 9012232
DS70 LT50 Set (0.8mm - 1mm Kit)
Réf. 9012237
LT50 Drive 80mm Rollerbat
Réf. 9019556
14mm Bearing Plate for Idler Bracket Kit
Réf. 9146007
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
Heavy Duty End Cap Shaft
Réf. 9420674
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
2.5" (60mm) Round Crown
Réf. 9707026
DS 85mm Round Drive
Réf. 9761003
P72 LT50 Drive
Réf. 9761011