DMI6Hz 80Nm 14rpm 120V With NEMA plug - 2007146 - 1 - Somfy

Ref : 2007146 - DMI6 HZ01 80/14 120/60 C6M PLU

DMI6Hz 80Nm 14rpm 120V With NEMA plug

DMI6HZ 80/14 120/60 C6M PLUG SJTW18

Applications
Awning / Rolling shutter
Embedded Technologies Warranty
Hz 5 years
Act For Green cycle
The carbon impact of the DMI6 HZ01 80/14 120/60 C6M PLU is 85.8kg CO2

What is the carbon footprint?

The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.

Other documents & links

Act for Green

Technical information

Approval
UL

Standard

Protection Index IP 44  
Insulation class Class I  

Dimension

Unwrapped length 34.57 in  
Unwrapped width 3.62 in  
Unwrapped height 3.62 in  
Minimum internal diameter 2.36 in  
External Diameter 2.28 in  
Diameter 2.36 in  

Technology

Radio Frequency 433.420 MHz  
Range in open field 492.15 ft  

Electrical

Consumption during operation 390 W  
Consumption in standby mode 0.34 W  
Minimum voltage 108 V  
Maximum voltage 126 V  
Rated current 3.4 A  
Power supply AC - RGE 2 - 120V/60HZ  

Mechanical

Speed 14 rpm  
Torque 80 Nm  
Type of limit switch unit Mechanical  
Capacity of the limit switch unit (turns) 28  
Power scale AC MOTOR SINGLE PHASE 37,5W TO 750W  
Repeatabilty < +/- 5  
Head type CMO  

Cable

Cable type SJTW  
Cable length 19.69 ft  
Cable color WHITE  
Number of wires of the cable 3  
Cable plug ends NEMA PLUG  
Wire section 0.0012 in²  

Other

Minimum working temperature -4 °F  
Maximum working temperature 140 °F  
Thermical time 5 min  

Accessories

43 Product(s)
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
T6-8-9 280X280 Idler side wall plate
Réf. 9017166
LT60 Drive 80mm Rollerbat
Réf. 9019558
T6 94mm Round
Réf. 9530124
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
LT60 Crown 80mm Rollerbat
Réf. 9019557
97mm Idle Insert
Réf. 9542009
Idler Support
Réf. 2003807
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
DMI Bracket 2 piece inside mount
Réf. 9520074
T6 Drive Stop & Screw
Réf. 9910062
DMI Bracket 2 piece inside mount adjustable U
Réf. 2005701
Vertical wall angle bracket for side plates 9017157 and 9017166
Réf. 9017172
T6 70mm Octagonal Aluminum drive wheel
Réf. 9018630
T6 78mm Round
Réf. 9530107
T6 70mm Octagonal
Réf. 9530117
T6 85mm Round (Simbac Tube) Crown
Réf. 9690085
T6-8-9 330X330 Motor side wall plate
Réf. 9017158
T5/T6 67mm ROUND
Réf. 9206028
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
70mm Octagonal LT60 Crown
Réf. 9705340
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
2.75" (67mm) Round Crown
Réf. 9420342
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
T6 85mm Round (Simbac Tube)
Réf. 9530109
DS 78mm/R Round Drive
Réf. 9761005
T6 Differential 60mm round
Réf. 9001407
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
DMI Bracket 3 piece outside mount
Réf. 9520079
DMI Bracket 100mm x 100mm
Réf. 9706034
DS 78mm Round Crown
Réf. 9707639
78mm Round Crown
Réf. 9707640
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
Short Awning Override Shaft Ring
Réf. 9016332
T6-8-9 280X280 Motor side wall plate
Réf. 9017157
T6-8-9 330X330 Idler side wall plate
Réf. 9017168
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
DMI Bracket 1 piece round adjustable cast plate
Réf. 9420647
DMI Bracket 1 piece round adjustable plate
Réf. 9420654
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
94mm Idle Insert
Réf. 9542008
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120