DMI5Hz 50Nm 12rpm 120V - 2004675 - 1 - Somfy

Ref : 2004675 - DMI5 HZ01 50/12 120/60 C6M WHI

DMI5Hz 50Nm 12rpm 120V

DMI5HZ 50/12 120/60 2,5M WHITE /1

Applications
Awning / Rolling shutter
Embedded Technologies Warranty
Hz 5 years
Act For Green cycle
The carbon impact of the DMI5 HZ01 50/12 120/60 C6M WHI is 97.5kg CO2

What is the carbon footprint?

The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.

Technical information

Approval
UL

Standard

Protection Index IP 44  
Insulation class Class I  

Dimension

Unwrapped length 31.38 in  
Unwrapped width 3.62 in  
Unwrapped height 3.62 in  
Diameter 1.97 in  
Riveting position distance 29.76 in  

Technology

Radio Frequency 433.420 MHz  
Coding Rolling code 16 million of possibilities  

Electrical

Consumption during operation 250 W  
Consumption in standby mode 0.34 W  
Minimum voltage 108 V  
Maximum voltage 126 V  
Rated current 2.1 A  
Power supply AC - RGE 2 - 120V/60HZ  
Antenna Integrated  

Mechanical

Speed 12 rpm  
Torque 50 Nm  
Type of limit switch unit Mechanical  
Capacity of the limit switch unit (turns) 28  
Power scale AC MOTOR SINGLE PHASE 37,5W TO 750W  
Head type CMO  

Cable

Cable type SJTW  
Cable length 19.69 ft  
Cable color WHITE  
Number of wires of the cable 3  
Wire section 0.0012 in²  

Other

Minimum working temperature -4 °F  
Maximum working temperature 140 °F  
Thermical time 4 min  

Accessories

58 Product(s)
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
Connector Sleeve 7mm Hex to 8mm Square
Réf. 9012323
T5 60mm Octagonal Aluminum
Réf. 9012951
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
2.75" (67mm) Round Crown
Réf. 9707031
60mm Octagonal Drive
Réf. 9751001
SM65 (63mm) Round Drive
Réf. 9751002
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
T5 70mm Round (Simbac Tube) Drive Wheel
Réf. 9521000
T5 70mm Octagonal Drive Wheel
Réf. 9521021
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
DS 78 LT50 Set
Réf. 9012239
T5 70mm Round (Simbac Tube) Crown
Réf. 9128424
DMI Bracket 3 piece outside mount
Réf. 9520079
T6 60mm Round
Réf. 9521028
2.5" 60mm Octagonal Crown
Réf. 9707025
AMA/P71 LT50 Drive
Réf. 9751015
T5 60mm Round Aluminum drive wheel
Réf. 9012813
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
T5 85mm Round (Simbac Tube)
Réf. 9521044
DS 78mm Round Crown
Réf. 9707027
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
Drive Stop and Screw
Réf. 9910004
T5 70mm Octagonal Aluminum drive wheel
Réf. 9012812
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
T5 71mm Round (Perma)
Réf. 9521010
T5 60mm Octagonal
Réf. 9521031
T5 50mm Octagonal
Réf. 9521054
DMI Bracket 100mm x 100mm
Réf. 9706034
70mm Octagonal Drive
Réf. 9761002
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
DMI Bracket 1 piece round adjustable cast plate
Réf. 9420647
DMI Bracket 1 piece round adjustable plate
Réf. 9420654
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
2.5" (60mm) Round Crown
Réf. 9707026
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
Ball Support for 9410803 and 9028665
Réf. 1781030
Steel Ball Bearing for idlers with 10mm pin
Réf. 2003600
T5 60mm Octagonal Aluminum drive wheel
Réf. 9012814
Short Awning Override Shaft Ring
Réf. 9016332
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
DMI Bracket 2 piece inside mount
Réf. 9520074
T5 85mm Round
Réf. 9521008
T5 70mm Octagonal Crown
Réf. 9521046
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
DS 85mm Round Crown
Réf. 9707035
Take-Up Reel for 2" Tube
Réf. 1781151
Nylon Bearing for idlers with 10mm pin
Réf. 2003599
DMI Bracket 2 piece inside mount adjustable U
Réf. 2005701
T5/T6 67mm ROUND
Réf. 9206028
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041