Products
Ref : 1162014 - 660R2 60/14 CMO 2464 2M - UN
660R2 CMO
Standard tubular motor with manual override for larger rolling shutters and awnings.
LT60 CMO standard tubular motors are ideal for larger applications. They feature a compact manual override for when power is not available.
| Applications | ||
|---|---|---|
| Awning / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| Wired | 5 years | |
Product benefits
Ease of Installation
- Standard 4-wire motor is an ideal choice for preconstruction opportunities while the walls are open and operation with a wired switch is preferred.
- Standard control options include wired wall switches.
- Easily set and adjust limits using rapid push-buttons.
- Detachable power cable to easily manage wire length, or replace if needed.
Environmentally Friendly
- Designed to save energy.
- Doesn't consume power in standby mode.
73.1*
kg CO2
What is the carbon footprint?
The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.
Details and specifications
Weight (with packaging) : 10.36 lb
Energy Savings
- Motorized rolling shutters can reduce heat gain in the summer and heat loss in the winter by up to 40%.
- Motorized retractable awnings can reduce heat gain in the summer by 77% while in use.
Protection
- Motorized rolling shutters provide a rigid protective barrier for any space.
- Motorized retractable awnings and exterior screens not only shield your family from the sun, but offer a cool, comfortable outdoor living space.
Additional Features
- A compact manual overide (CMO) which allows users to operate the motorized application manually when power is not available.
- Standard control options include wired wall switches.
Other documents & links
Installation information
Act for Green
Accessories
48 Product(s)
13mm Square Drive Shaft - 12mm OD for End Cap
Réf. 1781009
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
CMO Motor Cable - 12 ft.
Réf. 9012137
Short Awning Override Shaft Ring
Réf. 9016332
3.5" Round LT50/60 Drive (89mm x 2mm)
Réf. 9420303
2.75" (67mm) Round Crown
Réf. 9420342
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
CMO Motor Limit Setting Tool
Réf. 9910019
Idler End Cap without Shaft 2.5" OD with M5 Screw
Réf. 9129632
CMO Motor Cable - 6 ft.
Réf. 9208302
4.0" Round LT50 Drive
Réf. 9420304
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
P72 LT50 Drive
Réf. 9761011
2.75" Round LT60 Set "Hard Clip"
Réf. 9012246
CMO ME Awning Override Kit (U.S. Threads)
Réf. 9012349
4.0" Round Crown
Réf. 9420370
CMO Awning Motor Bracket - U.S. Threads
Réf. 9420648
CMO Awning Override Shaft (100mm Long) with Geiger Eye
Réf. 9707287
DS 78mm Round Crown
Réf. 9707639
CMO Awning Override Kit (U.S. Threads)
Réf. 9012348
LT60 Drive 80mm Rollerbat
Réf. 9019558
P72 LT60 Crown
Réf. 9277167
70mm Octagonal LT60 Crown
Réf. 9705340
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003
2.5" Fabric/Cord Clip
Réf. 9012201
CMO Awning Override Shaft (100mm Long)
Réf. 9685148
DS 78 LT60 Crown
Réf. 9705341
LT60 Crown 80mm Rollerbat
Réf. 9019557
Cable Guide for 63mm x 1.5mm (approx 2.5") Tube
Réf. 9146071
2.5" Round LT50 Drive "Hard Clip"
Réf. 9206019
3.5" Round Crown (89mm x 2mm)
Réf. 9520312
DMI Bracket 100mm x 100mm
Réf. 9706034
78mm Round Crown
Réf. 9707640
4.0" Round LT60 Set
Réf. 9012221
LT60 Stop Wheel Screw
Réf. 9205870
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
CMO Awning Override Shaft (170mm Long)
Réf. 9685136
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
Drive Stop for LT60
Réf. 9012194
70mm Octagonal LT60 Set
Réf. 9012247
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
CMO Motor Cable - 24 ft.
Réf. 9208308
LT60 Drive Wheel 101.6mm X 3.6mm
Réf. 9420309
DS 78mm/R Round Drive
Réf. 9761005
CMO ME Bracket
Réf. 9910041
