Products

DMI5Hz 30Nm 12rpm 120V - 2004673 - 1 - Somfy

Ref : 2004673 - DMI5 HZ01 30/12 120/60 C6M WHI

DMI5Hz 30Nm 12rpm 120V

DMI5HZ 30/12 120/60 2,5M WHITE /1

Applications
Awning / Rolling shutter
Embedded Technologies	Warranty
Hz	5 years

Act For Green cycle

56.6* kg CO₂

The carbon impact of the DMI5 HZ01 30/12 120/60 C6M WHI is 56.6kg CO2

What is the carbon footprint?

The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.

Other documents & links

Act for Green

Technical information

Approval
UL

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Unwrapped length	31.38 in
Unwrapped width	3.62 in
Unwrapped height	3.62 in
Minimum internal diameter	1.85 in
External Diameter	1.77 in
Diameter	1.97 in
Riveting position distance	29.76 in

Technology
Radio Frequency	433.420 MHz
Range in open field	492.15 ft
Coding	Rolling code 16 million of possibilities

Electrical
Consumption during operation	170 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	126 V
Rated current	1.5 A
Power supply	AC - RGE 2 - 120V/60HZ
Antenna	Integrated

Mechanical
Speed	12 rpm
Torque	30 Nm
Type of limit switch unit	Mechanical
Capacity of the limit switch unit (turns)	28
Power scale	AC MOTOR SINGLE PHASE 37,5W TO 750W
Head type	CMO

Cable
Cable type	SJTW
Cable length	19.69 ft
Cable color	WHITE
Number of wires of the cable	3
Cable plug ends	NEMA PLUG
Wire section	0.0012 in²

Other
Minimum working temperature	-4 °F
Maximum working temperature	140 °F
Thermical time	4 min

Accessories

58 Product(s)

T5 70mm Octagonal Aluminum drive wheel

107mm Sleeve Adaptor (Adaptor Set / Differential required for use)

T5 60mm Octagonal Aluminum

SM65 (63mm) Round Crown - 3 grooves

DS 85mm Round Crown

60mm Octagonal Drive

SM65 (63mm) Round Drive

Nylon Bearing for idlers with 10mm pin

Universal Joint 7mm Hex to 8mm Square Connector

T5/T6 67mm ROUND

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

Steel Ball Bearing for idlers with 10mm pin

DMI Bracket 3 piece outside mount

T5 70mm Round (Simbac Tube) Drive Wheel

T5 71mm Round (Perma)

2.5" 60mm Octagonal Crown

AMA/P71 LT50 Drive

70mm Octagonal Drive

Connector Sleeve 7mm Hex to 8mm Square

T5/T6 60mm Round Drive Aluminum

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

T5 85mm Round (Simbac Tube)

DS 78mm Round Crown

DS 70mm Round Drive (0.8mm - 1mm)

DMI Bracket 2 piece inside mount adjustable U

Nylon Ball Bearing 12mm ID for 1781030

T5 70mm Round (Simbac Tube) Crown

2" (47mm) Round Drive "Soft Clip"

T5 60mm Octagonal

T5 50mm Octagonal

DMI Bracket 100mm x 100mm

2.5" (60mm) Round Crown

2.75" (67mm) Round Crown

T5 60mm Octagonal Aluminum drive wheel

T5/T6 85mm Round (Simbac Tube)

DMI Bracket 1 piece round adjustable cast plate

DMI Bracket 1 piece round adjustable plate

Extension Shaft 7mm Hex L=330mm with Screw

DMI Bracket 2 piece inside mount

Connector Sleeve 7mm Hex to 7mm Hex

Ball Support for 9410803 and 9028665

T5/T6 70mm OCTAGONAL Aluminum

Standard Motor Tester Cable, 4-Wire

Short Awning Override Shaft Ring

2" (47mm) Round Drive "Hard Clip"

Nylon ball bearing 10mm ID for 1781030

Extension Shaft 7mm Hex L=220mm with Screw

T5 70mm Octagonal Drive Wheel

T5 70mm Octagonal Crown

DS 78mm Round Drive

DS 85mm Round Drive

Take-Up Reel for 2" Tube

T5 60mm Round Aluminum drive wheel

2.5" (60mm) Round Drive "Soft Clip"

Drive Stop and Screw