Products
Ref : 2001044 - DMI6 100/14 120/60 C2,5M WHITE
DMI6 100Nm 14rpm 120V
MOTOR DMI 6 100NM/14RPM 120/60 2,5M WHITE
| Applications | ||
|---|---|---|
| Awning / Rolling shutter | ||
| Embedded Technologies | Warranty | |
| Wired | 5 years | |
What is the carbon footprint?
The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.
Other documents & links
Act for Green
Technical information
| Approval |
|---|
| UR |
Standard |
|
|---|---|
| Protection Index | IP 44 |
| Insulation class | Class I |
Dimension |
|
|---|---|
| Unwrapped length | 27.72 in |
| Unwrapped width | 3.62 in |
| Unwrapped height | 3.62 in |
| Minimum internal diameter | 2.37 in |
| External Diameter | 2.26 in |
| Diameter | 2.36 in |
| Riveting position distance | 26.06 in |
Electrical |
|
|---|---|
| Consumption during operation | 430 W |
| Consumption in standby mode | 0 W |
| Minimum voltage | 108 V |
| Maximum voltage | 126 V |
| Rated current | 3.8 A |
| Power supply | AC - RGE 2 - 120V/60HZ |
Mechanical |
|
|---|---|
| Speed | 14 rpm |
| Torque | 100 Nm |
| Type of limit switch unit | Mechanical |
| Capacity of the limit switch unit (turns) | 34 |
| Power scale | AC MOTOR SINGLE PHASE 37,5W TO 750W |
| Repeatabilty | < +/- 5 |
| Head type | CMO |
Cable |
|
|---|---|
| Cable type | VVF |
| Cable length | 8.2 ft |
| Cable color | WHITE |
| Number of wires of the cable | 4 |
| Cable plug ends | STRIPPED |
| Wire section | 0.0012 in² |
Other |
|
|---|---|
| Minimum working temperature | -4 °F |
| Maximum working temperature | 14 °F |
| Minimum storing temperature | -13 °F |
| Maximum storing temperature | -76 °F |
| Thermical time | 5 min |
| Noise level (dB) | 65 dB |
Accessories
43 Product(s)
Idler Support
Réf. 2003807
DMI Bracket 2 piece inside mount adjustable U
Réf. 2005701
T6 Differential 60mm round
Réf. 9001407
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
T6-8-9 330X330 Motor side wall plate
Réf. 9017158
Vertical wall angle bracket for side plates 9017157 and 9017166
Réf. 9017172
T6 70mm Octagonal Aluminum drive wheel
Réf. 9018630
DMI Bracket 100mm x 100mm
Réf. 9706034
T6 Drive Stop & Screw
Réf. 9910062
Short Awning Override Shaft Ring
Réf. 9016332
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
2.75" (67mm) Round Crown
Réf. 9420342
DMI Bracket 1 piece round adjustable plate
Réf. 9420654
Extension Shaft 7mm Hex L=330mm with Screw
Réf. 9420659
DMI Bracket 2 piece inside mount
Réf. 9520074
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
T6 85mm Round (Simbac Tube)
Réf. 9530109
Universal Joint 7mm Hex to 8mm Square Connector
Réf. 2005416
T6-8-9 280X280 Motor side wall plate
Réf. 9017157
T5/T6 67mm ROUND
Réf. 9206028
DS 78mm/R Round Drive
Réf. 9761005
T6-8-9 330X330 Idler side wall plate
Réf. 9017168
DMI Bracket 1 piece round adjustable cast plate
Réf. 9420647
DMI Bracket 3 piece outside mount
Réf. 9520079
97mm Idle Insert
Réf. 9542009
Connector Sleeve 7mm Hex to 7mm Hex
Réf. 9685120
T6 85mm Round (Simbac Tube) Crown
Réf. 9690085
78mm Round Crown
Réf. 9707640
T6 70mm Octagonal
Réf. 9530117
T6 94mm Round
Réf. 9530124
94mm Idle Insert
Réf. 9542008
DS 78mm Round Crown
Réf. 9707639
70mm Octagonal Drive
Réf. 9761002
DS 78mm/D Round Drive
Réf. 9761004
T6-8-9 280X280 Idler side wall plate
Réf. 9017166
LT60 Drive 80mm Rollerbat
Réf. 9019558
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
70mm Octagonal LT60 Crown
Réf. 9705340
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
LT60 Crown 80mm Rollerbat
Réf. 9019557
Extension Shaft 7mm Hex L=220mm with Screw
Réf. 9420657
T6 78mm Round
Réf. 9530107