Products

DMI5 15Nm 18rpm 120V - 2000769 - 1 - Somfy

Ref : 2000769 - DMI5 15/18 120/60 C2,5M WHITE/

DMI5 15Nm 18rpm 120V

MOTOR DMI5 15NM/18RPM-120/60-C2,5M WHITE

Applications
Awning / Rolling shutter
Embedded Technologies	Warranty
Wired	5 years

Act For Green cycle

42.9* kg CO₂

The carbon impact of the DMI5 15/18 120/60 C2,5M WHITE/ is 42.9kg CO2

What is the carbon footprint?

The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.

Other documents & links

Act for Green

Technical information

Standard
Protection Index	IP 44
Insulation class	Class I

Dimension
Minimum internal diameter	1.85 in
External Diameter	1.77 in
Diameter	1.97 in
Riveting position distance	22.68 in

Electrical
Consumption during operation	145 W
Consumption in standby mode	0 W
Minimum voltage	108 V
Maximum voltage	126 V
Rated current	1.3 A
Power supply	AC - RGE 2 - 120V/60HZ

Mechanical
Speed	18 rpm
Torque	15 Nm
Type of limit switch unit	Mechanical
Capacity of the limit switch unit (turns)	28
Power scale	AC MOTOR SINGLE PHASE 37,5W TO 750W
Head type	CMO

Cable
Cable type	VVF
Cable length	8.2 ft
Cable color	WHITE
Number of wires of the cable	4
Wire section	0.0012 in²

Other
Minimum working temperature	-4 °F
Maximum working temperature	158 °F
Minimum storing temperature	-4 °F
Maximum storing temperature	176 °F
Thermical time	5 min

Accessories

58 Product(s)

DMI Bracket 2 piece inside mount adjustable U

T5 60mm Round Aluminum drive wheel

2" (47mm) Round Drive "Soft Clip"

T5/T6 85mm Round (Simbac Tube)

DMI Bracket 1 piece round adjustable cast plate

T5 60mm Octagonal

T5 50mm Octagonal

2.5" (60mm) Round Crown

2.75" (67mm) Round Crown

Standard Motor Tester Cable, 4-Wire

T5 60mm Octagonal Aluminum drive wheel

T5 70mm Round (Simbac Tube) Crown

DMI Bracket 1 piece round adjustable plate

Extension Shaft 7mm Hex L=330mm with Screw

Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)

DMI Bracket 2 piece inside mount

Ball Support for 9410803 and 9028665

T5/T6 70mm OCTAGONAL Aluminum

Nylon ball bearing 10mm ID for 1781030

Extension Shaft 7mm Hex L=220mm with Screw

T5 70mm Round (Simbac Tube) Drive Wheel

T5 70mm Octagonal Drive Wheel

T5 70mm Octagonal Crown

DS 78mm Round Drive

DS 85mm Round Drive

Take-Up Reel for 2" Tube

Universal Joint 7mm Hex to 8mm Square Connector

2.5" (60mm) Round Drive "Soft Clip"

2" (47mm) Round Drive "Hard Clip"

Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)

Drive Stop and Screw

Connector Sleeve 7mm Hex to 8mm Square

T5 70mm Octagonal Aluminum drive wheel

T5 71mm Round (Perma)

T5 85mm Round (Simbac Tube)

Connector Sleeve 7mm Hex to 7mm Hex

DMI Bracket 100mm x 100mm

DS 78mm Round Crown

Steel Ball Bearing for idlers with 10mm pin

T5/T6 60mm Round Drive Aluminum

Short Awning Override Shaft Ring

DMI Bracket 3 piece outside mount

2.5" 60mm Octagonal Crown

AMA/P71 LT50 Drive

70mm Octagonal Drive

107mm Sleeve Adaptor (Adaptor Set / Differential required for use)

T5 60mm Octagonal Aluminum

Nylon Ball Bearing 12mm ID for 1781030

SM65 (63mm) Round Crown - 3 grooves

DS 85mm Round Crown

60mm Octagonal Drive

SM65 (63mm) Round Drive

DS 70mm Round Drive (0.8mm - 1mm)

Nylon Bearing for idlers with 10mm pin

T5/T6 67mm ROUND