< Products

T5 10Nm 35rpm 120V - 2000645 - 1 - Somfy

Ref : 2000645 - T5 10/35 120/60 C2,5M WHITE /1

T5 10Nm 35rpm 120V

MOTOR T5-10NM/35RPM-120/60-C2,5M WHITE-

Applications
Awning / Exterior Solar Screens / Interior Window Coverings : Shades / Rolling shutter
Embedded Technologies Warranty
Wired 5 years
Act For Green cycle
The carbon impact of the T5 10/35 120/60 C2,5M WHITE /1 is 41.8kg CO2

What is the carbon footprint?

The carbon footprint calculates the greenhouse gas emissions over the entire life cycle of a product, from the extraction of raw materials to the end of its life. This calculation is based on a recognised international standard (ISO 14025) and is externally checked by Bureau Veritas.

Other documents & links

Act for Green

Technical information

Standard
Protection Index IP 44  
Insulation class Class I  

Dimension
Diameter 1.97 in  

Electrical
Consumption in standby mode 0 W  
Minimum voltage 108 V  
Maximum voltage 126 V  
Power supply AC - RGE 2 - 120V/60HZ  

Mechanical
Speed 35 rpm  
Torque 10 Nm  
Type of limit switch unit Mechanical  
Capacity of the limit switch unit (turns) 28  
Power scale AC MOTOR SINGLE PHASE 37,5W TO 750W  
Head type ROUND WITH PINS  

Cable
Cable type VVF  
Cable length 8.2 ft  
Cable color WHITE  
Number of wires of the cable 4  
Wire section 0.0012 in²  

Other
Thermical time 5 min  

Accessories

53 Product(s)
DS 78 LT50 Set
Réf. 9012239
T5 Operator Bracket 100mm x 100mm square
Réf. 9520187
2.75" (67mm) Round Crown
Réf. 9707031
60mm Octagonal Drive
Réf. 9751001
SM65 (63mm) Round Drive
Réf. 9751002
AMA/P71 LT50 Drive
Réf. 9751015
Universal End Cap - Collapsible 10mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420800
T5 Operator Bracket 48mm x 6mm
Réf. 9520040
T5 70mm Round (Simbac Tube) Drive Wheel
Réf. 9521000
T5 71mm Round (Perma)
Réf. 9521010
T5 70mm Octagonal Drive Wheel
Réf. 9521021
DS 78mm Round Crown
Réf. 9707027
DS 70mm Round Drive (0.8mm - 1mm)
Réf. 9751005
T5 60mm Round Aluminum drive wheel
Réf. 9012813
T5/T6 60mm Round Drive Aluminum
Réf. 9012950
T5 85mm Round (Simbac Tube)
Réf. 9521044
SM65 (63mm) Round Crown - 3 grooves
Réf. 9707030
DS 85mm Round Crown
Réf. 9707035
Drive Stop and Screw
Réf. 9910004
T5/T6 70mm OCTAGONAL Aluminum
Réf. 9011878
Operator Support for 10mm pin mount
Réf. 9510000
T5 Operator Bracket 48mm x 1/4
Réf. 9520188
2.5" 60mm Octagonal Crown
Réf. 9707025
Ball Support for 9410803 and 9028665
Réf. 1781030
Take-Up Reel for 2" Tube
Réf. 1781151
Nylon Bearing for idlers with 10mm pin
Réf. 2003599
Steel Ball Bearing for idlers with 10mm pin
Réf. 2003600
T5 60mm Octagonal Aluminum drive wheel
Réf. 9012814
T5 10mm Square Pin Mount Bracket
Réf. 9013923
2" (47mm) Round Drive "Hard Clip"
Réf. 9206088
T5 Operator Bracket 30mm counter sunk
Réf. 9520076
T5 85mm Round
Réf. 9521008
T5 60mm Octagonal
Réf. 9521031
T5 70mm Octagonal Crown
Réf. 9521046
70mm Octagonal Drive
Réf. 9761002
Standard Motor Tester Cable, 4-Wire
Réf. 9012116
T5 70mm Round (Simbac Tube) Crown
Réf. 9128424
2.5" (60mm) Round Drive "Soft Clip"
Réf. 9206041
T5 Operator Bracket 80mm x 80mm square
Réf. 9520049
T6 60mm Round
Réf. 9521028
T5 70mm Octagonal Aluminum drive wheel
Réf. 9012812
Nylon Ball Bearing 12mm ID for 1781030
Réf. 9028665
2" (47mm) Round Drive "Soft Clip"
Réf. 9206089
Universal End Cap - Collapsible 12mm Shaft (for 2" (47mm) Round Tube)
Réf. 9420801
107mm Sleeve Adaptor (Adaptor Set / Differential required for use)
Réf. 9012817
T5 60mm Octagonal Aluminum
Réf. 9012951
T5/T6 67mm ROUND
Réf. 9206028
Nylon ball bearing 10mm ID for 1781030
Réf. 9410803
T5/T6 85mm Round (Simbac Tube)
Réf. 9420300
T5 50mm Octagonal
Réf. 9521054
2.5" (60mm) Round Crown
Réf. 9707026
DS 78mm Round Drive
Réf. 9761001
DS 85mm Round Drive
Réf. 9761003